Product Features：
1. Full Peek high-pressure resistant double plunger constant flow pump: with a maximum pressure resistance of 35MPa (5000psi), it is resistant to acid, alkali, and organic solvents, and has stable and accurate flow rate.
2. Full Peek material flow system: acid resistant, alkali resistant, organic solvent resistant, stable and pollution-free for long-term use.
3. Built in column temperature chamber: adopting a cyclic constant temperature design, equipped with an independent temperature control system, supporting independent temperature control of multiple components such as chromatography columns, suppressors, and detectors.
4. Self regenerating electric film continuous regeneration suppressor: equipped with liquid interruption self-protection function and adaptable to gradient rinsing mode.
5. Intelligent control system: supports one click start and one click shutdown functions, with simple and efficient operation, and can be upgraded to 24-hour unmanned mode.
6. Suppressor automatic protection system: effectively avoids the risk of dry burning of suppressors caused by pipeline bubbles, rinsing solution interruption, pump failure, circuit interruption recovery, or human error, and extends the service life of equipment.
7. Temperature control performance: The operating temperature range covers room temperature+5 ℃ to 65 ℃ (some scenarios support up to 80 ℃), with temperature reproducibility of ± 0.01 ℃ and error control within ± 0.05 ℃.
8. Intelligent temperature management: Combined with AI-PID algorithm and dual isolation internal circulation temperature control system, it supports temperature gradient adjustment and adapts to complex analysis requirements.
9. Unmanned function: By timing shutdown and cooperating with the shower solution generator, 24-hour continuous operation and automatic scientific shutdown process can be achieved, reducing human intervention.
Technical Specifications：
Double plunger series horizontal flow pump |
Pump pressure resistance | 42MPa |
Maximum operating pressure | 5000psi |
Flow range | 0.001-9.999mL/min |
Flow accuracy | RSD≤0.2% |
Column oven |
Structure | Built-in column oven |
Temperature setting error | ±0.1℃ |
Detector |
Material | bipolar conductivity detector |
Qualitative repeatability | 0.50% |
Quantitative repeatability | 1.00% |
Minimum detection concentration | Cl-≤0.0005 µg/ml |
Anion automatic regeneration membrane suppressor |
Continuous automatic regeneration, no need to add acid and water |
Dead volume | <90L |
Inhibition capacity | >100μeq |
Compatibility | Anion suppressors are compatible with hydroxide systems and carbonate and bicarbonate systems; |
Temperature control | Synchronous temperature control with the detector, anti-interference, fast balance, small drift, more stable |
